Garage Door Repair Chagrin Falls Checklist to Keep Door Running Smoothly All Season

With winter going away and summers coming in, homeowners are planning their spring cleaning. While you are tidying up the closets and washing the patio, you should also remember to clean the garage. This is especially true about the garage door system that needs a spring check by garage door repair Chagrin Falls. After the cold temperature and snow, your garage might need an extra attention to ensure it is working efficiently and safely.

Here is a checklist that can help you with garage tune-up to ensure garage is in tip-top shape.

·        You must begin the spring checklist with a detailed visual inspection of the garage door panels. Look for cracks and warping along with rust spots and peeling paint that are generally issues caused by the winter conditions. In case of wooden doors, they tend to swell and rot from the excessive moisture while the metal doors tend to rust and require sanding or repainting. Check the weatherstripping that is present along the bottom and side of the door. The weatherstripping ensures that the garage is fully insulated and protected from rain, debris and pests. In case it is brittle or cracked, you might need to replace it before spring.

·        According to the garage door repair Mentor, you must test the door’s balance to understand if it working smoothly. The unbalanced door can cause extra stress on the opener and lead to premature wear along certain parts. You can test the balance by disconnecting the automatic opener by using the emergency release cord. Then, you should manually lift the door halfway along. In case the springs are in good shape, they will stay in place. However, if it raises and falls, this means the balance is off. In case the door fails the balance test, you must call the garage door repair so that they can adjust torsion or extension springs. You should avoid DIY fixes as the components involved can be under high tension and leave them to the professional garage door repair Chagrin Falls.

·        Garage doors are used as entryway and are opened/closed hundred times a year. During this vibration, you might notice that the nuts, bolts and bracelets are loosened over time. You can use a socket wrench to tighten the roller brackets and bolts on the door as well as tracking system. You should avoid overtightening the door systems. This is especially true when you have wooden garage doors. In this case, the wood stripping is possible. You should try to leave adjusting the bolts along the torsion spring system to the professional.

·        During the spring time, you should lubricate the different moving components of your garage door. This can help avoid friction and prevent the rust. It will help you keep the system running smoothly. You should use lubricant on the rollers, hinges, springs and bearings. You should spray a small amount of lubricant and wipe it off immediately.

You should also test the auto-reverse safety feature on the garage door. There is a mechanical and photoelectric feature. In case you want to test the mechanical system, you should use paper towels on the ground, close the door and then check if it reverse hits on the object. To test the photo-eye sensors, you should wave an object on the sensor while the door is closing. If it doesn’t reverse immediately, there could be a problem. You may need to connect with garage door repair Mentor immediately.